| Adapter | 3-Flange Bayonet Adapter with 222 Double O-ring (28) |
| Application | Air/Gas Filtration |
| Application Area | Bioreactors (Inlet | Outlet) Storage tank venting Filling equipment venting Freeze dryer autoclave venting |
| Industry | Pharma / Biotech |
| Bacterial Retention | Quantitative Retention of 1 × E7 CFU/cm² Brevundimonas Diminuta ATCC® 19146 per ASTM methodology |
| Bacterial Endotoxins | < 0.25 EU/mL as determined by the LAL test |
| Biocompatibility (USP Class VI) | USP<88> |
| Biological Reactivity | All materials of this filter element meet the requirements of the current USP Biological Reactivity tests <88> for plastics Class VI (Systemic Injection, Intracutaneous and Implantation tests). |
| Extractables | The total amount of extractables is well below the limits established by the current USP unter "Sterile Water for Injection". |
| Filter Size | 20"(1.0 m² / 10.8 ft²) |
| Filtration Area | 1.5 m² |
| Outer Diameter | 71 mm |
| Capsule/cartridge Format | Cartridges |
| Maximum Allowable Back Pressure | Cartridges GA | Mini Cartridges | Junior at 3 bar | 43.5 psi at 20 °C Cartridges LG | Maxicaps® | Midicaps® | Capsules at 2 bar | 29 psi at 20 °C |
| Maximum Diffusion | 14 mL/min at 0.7 bar |
| Minimum Required Bubble Point | 1.0 bar | 14.5 psi |
| Filter Material | Polytetrafluorethylene (PTFE) |
| Housing Material | Polypropylene |
| Material O-ring | Seal | EPDM |
| Membrane Material | Polytetrafluorethylene (PTFE) |
| Support Fleece | Polypropylene (PP) |
| Maximum Differential Pressure | 20 °C: 5 bar; 80 °C: 2 bar |
| Gamma Stable | No |
| Non-fiber Releasing | This filter product complies with the title 21 of the Code of Federal Regulations (CFR), section 210.3(b)(6) and 211.72. |
| Pore Size | 0.2 µm |
| Pore Size Final-filter | 0.2 µm |
| Brand | Sartofluor® |
| Filter Type | Membrane Filters |
| Pack Size | 1 |
| Sterilization Method | Autoclavable & In-Line Steam Sterilizable |
| Sterilizing Grade | Yes |
